Voltage Regulators and Controllers
V1200
Transpo External Voltage Regulator 13v-16v max NON Harness Potentiometer Style (30 day warranty)
$ backordered
Voltage Control Module
Voltage control Module used to adjust voltage from 14.8v to 15.8v (based on 14.8v VR setpoint). This connects to All high output alternators using the Denso GM 3 pin voltage regulators , some using diodes off sense wire (no more with this controller). This is a Voltage control knob supplied with a digital voltage meter. Comes with: Controller WITH KNOB (not pictured) 8 foot harness with 3 pin Harness attached and instructions. Comes in Black CASE ONLY.
(NOTE: This controller can support up to 3
Alternators (harness sold separately),
but you are required to use a 30AMP,
12V 5 Pin Universal Relay #88069.
If you do not use a relay you will have voltage issues)
**HIGHER VOLTAGE IS FOR LITHIUM BATTERIES**
$140.00
VCM-6003_BLACK
VCM-6003-3 HARNESS
Multiple Alternator (3) Harness Assembly for
our VCM-6003. Supplied with Relay and 3 plug
and Play plug connectors to plug into 3 Pin 14.8v
Internal Voltage Regulator.
NOTE: CAN ONLY BE USED ON 1 BATTERY TYPE
CANNOT USE IF USING MIXED BATTERY TYPES
$125.00
PWM-VOLTAGE CONTROLLER
Voltage control Unit (battery light turn off) Module. ONLY for GM vehicles 2005+ with2 pin harness (PCM). This is a frequency module, NOT a Volt Meter or Voltage control knob. Includes plug harness to alternator Comes with: Controller, Plug harness, wires and instructions. VIDEO IN ACTION AVAILABLE ON OUR TECHNICAL HELP SECTION
$100.00
HEADWAY Voltage Control KIT
Voltage control KIT used to adjust voltage from 13.9v to 14.8v (based on 13.9v VR setpoint supplied). The Kit requires the Internal Voltage regulator supplied to be installed "professionally". It ONLY fits DENSO Design high output alternators (Chrysler Vehicles require units to be sent in). This is a Voltage control knob supplied with a digital voltage meter and Internal Voltage Regulator Comes with: Controller WITH KNOB (not pictured) 8 foot harness with Special Internal Voltage Regulator.
**HEADWAY LITHIUM BATTERIES OR AGM**
$150.00
HW-VCM-KIT
IN6003K
Internal Voltage Regulator for Denso Hairpin Alternators, 14.8v Setpoint and comes with Plug harness
$60.00
Plug Harnesses
B46-1810
Booster 15.2v Denso 3 Pin Replacement Harness For Lithium Batteries and use on Denso Hairpin 3 Pin Regulator
$35.00
Pulleys
6G Pulley
6 Groove Over Drive Pulley 45mm OD Standard Black, DO NOT select additional Color
$30.00
HP-24-82260
Custom Billet Pulley for high RPM
6 Groove, 3" Diameter (17mm bore)
Pulley is in Natural form.
7G Pulley
7 Groove Over Drive Pulley 45mm OD Standard Black, DO NOT select additional Color
$30.00
GROUND LUG
1/0 Ground Lug to connect onto
Existing High Output Alternator
Item Ships Via Regular US Mail
$30.00
Loading...
section
2
